RM Battery replacement

WARNING! Follow the instructions below.

Complete replacement of one battery before starting to replace the second battery.

Replacing the batteries:

Lift the bumper and remove the batteries fuse';
Remove the cutting height adjustment know by lifting it upwards (figure 1)
Unscrew the five nuts manually at the rear side of the Chassis cover (figure 2). If you find it difficult use a wide flat screwdriver;
Lift the rear side of the cover (see figure 3) and disconnect only the two cables from the left battery (figure 4);
Place the new battery and connect the cables to the battery tabs when the red and the black cables are fitted to the color on the battery;
Disconnect the cables from the right battery;
Place the new battery and connect the cables to the battery tabs respectively to the color;
Place the cover back in its position and screw the five nuts manually, confirm they are tight enough;
Insert the batteries fuse and confirm the Robomow wakes up.

Nav view search